|
|
-
The difference of gray iron and
ductile iron castings
- on Jun. 28, 2013
The followings are the main
difference and properties of gray
iron castings and ductile iron
castings.
-
Metal Casting Price Breakdown
- on Jun. 24, 2013
The following casting price
breakdown is typical of the foundry
industry, not much different than
other manufacturers. In foundries it
is very difficult to cut material
costs as they are world priced
commodities and energy costs.
-
Cast Iron Prices Per Pound,
Kilogram or Ton - on
Jun. 20, 2013
The following table is listing the
grey cast iron and ductile iron
prices per lb, kg and ton. Hope it
could help the buyers to do the
approximate evaluation to the prices
of iron castings.
-
Cast Iron Bearing Pulley
- on Jun. 19, 2013
This kind of pulley was produced by
spheroidal graphite AS 1831 Grade
500.7, also called as ductile iron
ASTM A536 70-50-05, or 80-55-06.
-
DIN EN 1561 Grey Cast Iron
- on Jun. 18, 2013
This European Standard DIN-EN-1561
specifies the properties of
unalloyed and low-alloyed grey cast
iron used for castings, which have
been manufactured in sand moulds or
in moulds with comparable thermal
behavior.
-
Lost Wax Investment Casting
Process - on Jun.
17, 2013
Introducing the production process
of lost wax investment casting and
machining in China by Dandong
Foundry.
-
Cast Iron Castings made in China
Foundry - on Jun.
17, 2013
Iron castings are the base of
industries. There are countless
products and parts made by ductile
iron and gray iron materials.
Herein, we just listed some of them
made in China.
-
Cast Steel Castings made in China
Foundry - on Jun.
17, 2013
Steel castings are widely used all
round the world. There are countless
products and parts made by carbon
steel and alloy steel materials.
Herein, we just listed some of them
made in China.
-
ASTM A48 Gray Iron Castings
- on Jun. 13, 2013
Dandong Foundry is producing various
grades of ASTM A48 gray iron
castings, some rough castings, and
some machined parts.
-
Ductile and Gray Cast Iron Price
per Ton - on Jun.
12, 2013
Many cast iron buyers are familiar
to evaluate ductile iron and gray
iron casting prices by USD/ton. This
evaluation is not suitable for those
iron castings with machining works,
but this method could be used for
evaluating the prices of rough
castings.
-
Cast Iron Dentist Chair Holders
and Brackets - on
Jun. 07, 2013
Our foundry produced some ductile
iron chair holders and brackets for
dentist chairs. The material is
ductile iron ASTM A536 65-45-12.
-
Ultrasonic Velocity Inspection to
Ductile iron Material Quality and
Nodularity - on May
09, 2013
Our foundry is using the Dakota
ultrasonic velocity tester to
inspect the quality and nodularity
of ductile iron castings. This
method could inspect material
quality to large quantity of iron
and steel castings.
-
Some Cast Iron Foundry Production
Photos - on Apr. 18,
2013
These are some production photos
from Dandong Foundry, including
automatic molding line, ductile iron
inoculation equipment, and
traditional manual green sand
casting production workshop.
-
Engineering Structural Steel
Material Standard GB/T 11352
- on Apr. 17, 2013
This is a China standard for the
chemical analysis and mechanical
properties of engineering structural
steel. It has higher strength,
mechanical properties, shock
resistance and corrosion resistance.
-
Chemical Composition of Cast Iron
and Cast Steel - on
Mar. 28, 2013
Why is it important to control the
chemical composition of metal
castings? How to inspect the
chemical composition of cast iron
and cast steel?
-
SS 416 410 stainless steel
casting manufacturer and steel
foundry in China -
on Mar. 08, 2013
Our foundry could manufacture 416 SS
and 410 SS stainless steel castings
by sand casting process and lost wax
investment casting process.
-
Cast iron and steel foundry for
Australian agricultural machinery
spare parts market -
on Feb. 21, 2013
Dandong foundry is located in China,
but we have many years working
experience to manufacture and export
iron and steel casting parts to
Australia. Most of customers are
located in Western Australia.
-
Dimensional tolerance of drilling
holes on iron and steel castings
- on Feb. 04, 2013
Normal drilling machines can meet
the diameter tolerance of 0.1 to
0.2mm, after reaming, the tolerance
could be met to 0.05mm.
-
Plow Tyne, Point and Holder of
Cast Iron and Cast Steel
Manufacturer in China
- on Jan. 22, 2013
Our foundry is producing several
types of plow tyne, points and
holders for agriculture cultivators,
seeders, and rock pickers (rock
mowers).
|
|
