-
BS EN 10045 Charpy Impact Test
for Iron and Steel Castings
- on Jun. 30, 2011
This standard can be used for the
impact test for cast iron and cast
steel materials. Herein, we just
list some useful information for
iron foundries.
-
The classification, properties
and applications of abrasion
resistant cast iron
- on Jun. 29, 2011
It is known to us that, in order to
increase the strength, toughness and
hardness and wear resistance, iron
foundries often add an appropriate
amount of Cu, Cr, Mo, W, Ni, Mn and
other alloy elements into the cast
iron.
-
What is abrasion resistant cast
iron - on Jun. 28,
2011
Abrasion resistant cast iron, we can
also call it wear resisting cast
iron. A certain amount of hardening
phase distribute in the cast iron
matrix which makes it not easy to
wear.
-
Powder coating for iron castings
- on Jun. 24, 2011
Powder coating is a 100% solids
powder coating without solvent-free.
It has a solvent-free,
non-polluting, recyclable,
environmental protection, saving
energy and resources, reduce labor
intensity and high mechanical
strength.
-
How to produce small iron
castings - on Jun.
20, 2011
In the past, we have talked about
how to produce large iron castings,
so now, we will talk about some
about how to produce small iron
castings.
-
How to be a qualified iron
casting factory in China
- on Jun. 17, 2011
There are many iron casting
factories in China, however, I think
most of them are not very good. As a
market manager of Dandong Foundry, I
usually talked about this issue with
our clients, and hope to improve our
capability to produce more qualified
iron castings.
-
Electrophoretic paint for iron
casting parts - on
Jun. 14, 2011
Electrophoretic paint is also known
as cataphoresis painting, KTL
painting or electrophoretic coating,
which is a new type of paint with
low pollution, energy saving,
resource saving and good anti
corrosion.
-
Electro galvanizing and hot dip
galvanizing for iron castings
- on Jun. 10, 2011
Zinc plating includes electro
galvanizing and hot dip galvanizing.
Electro galvanizing is also called
as cold galvanizing. It uses the
principle of electrolysis, to form a
even and dense zinc coating.
-
3D three dimensional measuring
machine (CMM) - on
Jun. 04, 2011
In our nearby machining workshop,
they have a three dimensional
measuring machine.
-
What is malleable cast iron
- on Jun. 03, 2011
Malleable cast iron is produced from
white cast iron, which is made from
hot liquid iron with certain
chemical components. The white cast
iron needs to be treated by
malleablizing, such as graphitizing
or oxidation and decarbonization,
then its metallographic structures
or chemical components will be
changed, so can become into
malleable cast iron.
|
