-
Ductile Cast Iron Turbine Housing for Turbocharger - on Apr. 29, 2024
Ductile cast iron is common material for turbine housing of diesel engine, truck turbocharger and engineering equipment turbocharger.
-
Ductile Iron Diesel Injection Pump Housing - on Apr. 26, 2024
Our Dandong Foundry can produce ductile iron castings by China standard GB 1348 QT400-18, QT450-10, QT500-7 and QT600-3.
-
How to Solve Casting Deformation Defects? - on Apr. 23, 2024
There are many reasons for casting deformation defects. The following methods could prevent these defects.
-
What Factors are Causing Casting Deformation Defects? - on Apr. 18, 2024
Casting deformation defect is a common problem in casting production, and its causes can be roughly divided into structure design issue, inside stress, unreasonable sand box, improper pouring riser, etc.
-
Non-destructive Inspection of Large Castings - on Apr. 15, 2024
Large iron and steel castings generally have complex shapes and components, with complex internal cavity structures.
-
Ductile Cast Iron Production Notes - on Apr. 11, 2024
The mechanical properties of ductile iron castings is close to that of steel, so it has been developed into a common cast iron material that is widely used after grey cast iron.
-
High SiMo Ductile Iron Castings - on Apr. 08, 2024
High Silicon Molybdenum is also referred to as SiMo Ductile Iron and High Silicon Moly. This material is a variation SG Iron that offers superior heat resisting characteristics.
-
Ductile Iron Anchor Coupling Castings - on Apr. 03, 2024
The ductile iron anchor coupling is used to restrain the fire hydrant to the gate valve. Ductile iron is produced by adding magnesium alloy to molten iron.
-
Ductile Iron Anchor Head for Post Tension System - on Apr. 01, 2024
Anchor head is an anchoring component of a bonded multi-strand tendon system. The common design materials are ductile iron and casting steel.
-
Cast Iron Anchor Castings for Post Tension System - on Mar. 28, 2024
The materials of anchor castings used for post tension system is ductile iron and grey iron.
-
Gray Cast Iron Downspout Boots - on Mar. 25, 2024
Gray iron downspout boots are used as a transition piece for connecting sheet metal exposed downspouts to underground cast soil piping.
-
Gray Iron Casting Manufacturer in China - on Mar. 21, 2024
Our Dandong Foundry can produce gray iron castings in different grades, such as HT100, HT150, HT200, HT250, HT300 and HT350.
-
Grey Cast Iron Casting for Ground Sleeve - on Mar. 18, 2024
Ground sleeve is designed for flexible installation of signposts, bollards and numerous other facilities which are to be anchored by a round tube in the ground.
-
Ductile Iron Casting Manufacturer in China - on Mar. 14, 2024
Our Dandong Foundry can produce ductile iron castings in different grades, such as QT400-15, QT400-18, QT450-10, QT500-7 and QT600-3.
-
Powder Coating vs Spray Painting - on Mar. 11, 2024
Powder coating and spray painting are two common finishing processes used in the manufacturing industry.
-
How to Choose the Right Material for Your Handwheel? - on Mar. 07, 2024
Brief introduction to the handwheels made by aluminum, placstic, duroplastic, stainless steel and cast iron.
-
Ductile Cast Iron Guardrail Support for Bridge - on Mar. 04, 2024
The ductile cast iron guardrail support is an isolation ductile iron cast facility used to block both sides along the bridge.
