Dandong Foundry
About Us Casting Products Casting Workshop Machining Workshop Inspection Certificate Blog Articles Contact Us
  Ductile Cast Iron Plow Point Seeding Machinery Parts  

Ductile Iron plow point and tillage point are the seeding machinery parts produced in our Dandong Foundry.

Normally, our foundry use shell mold casting or automatic casting molding line to produce cast iron plow points amd tillage points. The ductile iron plow point described below is cast by shell molding in our foundry.

Because the ductile iron plow point should be assembled on the seeding machine together with other accessories, it is required high dimensional accuracy.

Welding repairing and shrinkage defects are not allowed at any position of the ductile iron plow point. The burrs, sharp edge and the extra materials should be grinded to be flat.

As the photo shown below, the pouring gate must be grinded to be flat, otherwise it will affect the positioning of further machining process.


Home Page  |  Casting Products  |  Contact Us

   ADD: No.1-4-6, Jianshe Road, Qianyang Town, Donggang, Dandong, Liaoning, China 118301
   SITEMAP | China Foundry